Sediko M10

Sediko M10

The automatic erythrocyte sedimentation rate analyser

The automatic erythrocyte sedimentation rate analyser (SR) SEDIKO M-10 (Cat. No. 3.03.9.1) will facilitate the work of the laboratory personnel, and the test results will be even more precise. 

You only need to insert the ready-made pipettes into the analyser, the subsequent process will take place automatically. The compatibility with the Westergreen procedure is ensured: after a period of 1 hour the device will check the height of the column, and you can read the results thus obtained even later. 

10 measuring places (slots) of the analyser allow for the same number of independent SR tests. 

For automatic operation use only the ungraduated pipettes VACUPETA-SEDIKO 3.03.1.7. 

Technical specifications

procedure: 
  • a modified erythrocyte sedimentation rate measuring procedure according to Westergreen 
performance: 
  • up to 10 independent test runs simultaneously 
measuring range: 
  • 0 - 120 mm/h test run 
duration: 
  • 1 hour 
dimensions: 
  • 310 (W) × 190 (L) × 320 (H) mm 
power supply 
  • 220 - 230V, 50Hz 
operating supplies: 
  • one-way pipette VACUPETA - SEDIKO (ungraduated, automatic pipetting, automatic zero-value setting, suitable for majority of test tubes for vacuum blood collection for ESR with dimensions of 75 × 13 mm) 
accessories: 
  • serial matrix printer 
  • serial RS-232 interface for optional software for PC on request

 

Cat. No.

Description

Remark

3.03.9.1

SEDIKO M10

automatic ESR analyser

3.03.1.7

VACUPETA pipette non-graduated

for automatic ESR analyser

4.03.1.3

VACUTUBE ESR 4NC

corresponding vacuum blood collection tube